PGM-1
Plasma Sonics Ltd. Co. presents the PGM-1. The culmination of nearly 20 years of research and development by Dr. James Bare, D.C. , resulting in 5 Patents. The PGM-1 produces 300 watts maximum power to the plasma tube . The plasma being formed via gas ionization creates pulsed oscillating electrical fields with a minor magnetic component .The electrical field is not just a function of the driving power of the plasma tube, but also a function of the number of gas molecules within the tube. Thus a 20" long By 2 inch diameter tube with optimized internal gas pressures increase the emitted field. Plasma Sonics uses a proprietary mixture of noble gasses along with our patented mechanisms that allows for the use of much higher gas pressures than tubes of this size typically will allow. The PGM -1 utilizes the same transmitter as found within the PGM-2, but due to the limitation of the power transistors that produce the systems 300 watts of output, it has a pulse output capability of 310,000hz . Typical pulse rise times are around 900 nanoseconds and fall times of the pulse envelope are under 100 nanoseconds.
Plasma Sonics equipment has been checked for the emission of ionizing radiation and due to the design, there is none.
The PGM-1 is sold as a complete system that is ready to operate that includes a 2" X 20 " long plasma tube , wiring harness, tube stand, an Atelier Robin F165i square wave frequency generator, and accessory parts This system just needs to be unpacked, set up, and turned on..
The PGM-1 is designed and labeled for use as as an Agricultural Instrument. Pulsed fields can have dramatic effects upon seed germination times, growth rates, crop yields and other Agricultural purposes. This design and labeling in no way affects the devices capabilities or user desired application within those capabilities. The PGM-1 comes with instructions, scientific papers showing the effects of fields when used for Agricultural Purposes, and a 180 day parts and labor warranty. This warranty includes reimbursement for return shipping charges via regular mail during the first 30 days of the warranty period.
Specifications:
Power Requirements - 115 VAC (@ about 5 amperes ) or 230 VAC ( @ about 3 amperes) . Unit automatically adapts to any voltage and hz requirements.
Maximum Power Output : 300 watts maximum typical into a plasma tube .
Pulse Frequency Capability - 310,000 hz
Plasma automatically cuts off at the end of the frequency sequence.
Front panel meters - SWR and Amperes
Size - Approximately 17" X 17 " X 8 inches high
Weight ( Complete Unit) approx 34 Lbs.
Please Contact Us via Email if you have any questions about the PGM-1.
jbare@plasmasonics.com
Phone: 505-239-1886